Workshop. MPC-to-MV Translator ÂØÒňΠMV-8000

Transcription

1 ÂØÒňΠMV-8000 Workshop MPC-to-MV Translator 2005 Roland Corporation U.S. All rights reserved. No part of this publication may be reproduced in any form without the written permission of Roland Corporation U.S. All trademarks are the property of their respective owners. MVWS09 1

2 About the MV-8000 Workshop Series Roland s MV-8000 Production Studio is packed with features for making music. It s a heavy-duty sampler that can do all sorts of things with sounds you sample or import. Its sequencer has 136 tracks for MIDI sequencing and playing back audio, and its set of editing tools is deep. It s a great box for performing using its pads or an attached MIDI keyboard and, of course, it can even burn a CD of your final master mix. Each MV-8000 Workshop Series booklet focuses on one MV-8000 topic, and is intended as a companion to your MV-8000 Owner s Manuals. This booklet requires MV-8000 O.S. Version 3 or higher. You can download the latest O.S. for free from About This Booklet This booklet is for AKAI MPC-000 and MPC-2000/XL users who ve migrated to the Roland MV It translates MPC button-presses and terms into MV-8000 button-presses and terms to help make the switch even easier. About the Charts in the Booklet The following charts list an item from an MPC on the left, and its MV-8000 couterpart on the right. There s a chart for MPC-000 items, and one for MPC-2000/XL items. Here are some shortcuts we re using: Whenever we refer to one of the numbered keypad buttons, we ll call it Keypad [number], as in Keypad 1 for the #1 ABC keypad button. The four CURSOR buttons are shown as 3,, 5, and 6. In cases where we list a series of actions, we use > to get from one action to another. For example: instead of saying Press the PROJECT button, then press the third keypad button, and then press the ENTER button we ll say PROJECT > Keypad 3 > ENTER. MPC 000-to-MV-8000 Translator On the MPC-000: MAIN key TAP TEMPO key BPM/TAP button ROLL button UNDO SEQ key UNDO/REDO button FULL LEVEL key FIXED VELOCITY button 16 LEVEL key MULTILEVEL button ERASE key EVENT ERASE button JOG dial VALUE dial MAIN VOLUME knob MASTER knob REC GAIN knob SENS L/R knobs RECORD key PAD BANK (A-F) key PAD BANKS button + VALUE dial 2

3 On the MPC-000: LOAD key Load Project PROJECT > Keypad 3 > ENTER (Project Load) Load Patch INSTRUMENTS > MENU > Keypad 2 > ENTER Assign Sounds PROJECT > Keypad 8 > ENTER SAVE key Save Project PROJECT > Keypad SONG key MIXER key Partial Edit Screen INSTRUMENTS > QUICK EDIT > Select pad MISC. key /Pattern Screen parameters, or SETUP > Keypad 2 > ENTER (Sync) Edit SAMPLE key > Select sample > F2 Edit QUICK EDIT > Select pad > F1 GLOBAL key Pad/Panel Settings SYSTEM > Keypad 2 > ENTER > F1 (Pad) or F2 (Panel) System Info SYSTEM > Keypad 5 > ENTER PROGRAM key Edit Patch INSTRUMENTS > Select patch > F5 (Patch Edit) MIDI key MIDI Record Filter Select MIDI track > REC > F1 (Rec Filter) NEXT SEQUENCE key In Pattern mode, F1 (Pattern List) TRACK MUTE key SHIFT + PAD BANK buttons On the MPC-000: Q1-Q knobs/q5-q6 sliders Slider SYSTEM > Keypad 6 > ENTER Set up effect knobs EFFECTS > F5 > Choose effect block > F3 (Knob Assign) STEP keys STEP buttons GO TO + EVENT SHIFT + EVENT BAR keys MEAS buttons REC key REC button OVERDUB key REC > Choose desired Overdub setting STOP key STOP button PLAY key PLAY button PLAY START key TOP button MASTER TEMPO key BPM/TAP > F5 (T. Track On/Off ) toggle switch Available timings: 1/8, 1/8(3), 1/16, 1/16(3), 1/32, 1/32(3), 1/6, 1/6(3) SHIFT+ROLL Available note values: 960 = 1 2, 60 = 1 2(3), 80 = 1, 320 = 1 (3), 20 = 1/8, 160 = 1/8(3), 120 = 1/16, 80 = 1/16(3), 60 = 1/32, 0 = 1/32(3), 30 = 1/6 3

4 On the MPC-000: Song Timing Correct TC: 1/8 TC: 1/8(3) TC: 1/16 TC: 1/16(3) TC: 1/32 TC: 1/32(3) TC: 1/6 TC: 1/6(3) Swing Keygroup Program Multi Terminology Translation Pattern Quantize 80 = 1 notes 320 = 1 (3) notes 20 = 1/8 notes 160 = 1/8(3) notes 120 = 1/16 notes 80 = 1/16(3) notes 60 = 1/32 notes Shuffle Partial Patch Instruments MPC 2000/XL-to-MV-8000 Translator On the MPC-2000/XL: MAIN SCREEN key TAP TEMPO/ UNDO SEQ key FULL LEVEL key BPM/TAP and ROLL buttons UNDO/REDO button FIXED VELOCITY button 16 LEVEL key MULTILEVEL button ERASE key EVENT ERASE button On the MPC-2000/XL: DATA wheel MAIN VOLUME knob REC GAIN knob RECORD key PAD BANK (A-D) key VALUE dial MASTER knob SENS L/R knobs PAD BANKS button + VALUE dial SHIFT + LOAD Load Project PROJECT > Keypad 3 > ENTER (Project Load) Load Patch INSTRUMENTS > MENU > Keypad 2 > ENTER Assign Sounds PROJECT > Keypad 8 > ENTER SHIFT + SAVE Save Project PROJECT > Keypad SHIFT + SONG SHIFT + SAMPLE SHIFT + MIXER Partial Edit Screen INSTRUMENTS > QUICK EDIT > Select pad SHIFT + MISC /Pattern Screen parameters, or SETUP > Keypad 2 > ENTER (Sync) SHIFT + TRIM Edit QUICK EDIT > Select pad > F1 SHIFT + OTHER SYSTEM button SHIFT + PROGRAM Edit Patch INSTRUMENTS > Select patch > F5 (Patch Edit) SHIFT + MIDI SYNC SETUP > Keypad 2 > ENTER NEXT SEQ key In Pattern mode, F1 (Pattern List) TRACK MUTE key SHIFT + PAD BANK buttons

5 On the MPC-2000/XL: NOTE VARIATION ASSIGN Slider SYSTEM > Keypad 6 > ENTER Set up effect knobs EFFECTS > F5 > Choose effect block > F3 (Knob Assign) STEP keys STEP buttons GO TO + EVENT SHIFT + EVENT BAR keys MEAS buttons REC key REC button OVERDUB key REC > Choose desired Overdub setting STOP key STOP button PLAY key PLAY button PLAY START key TOP button MASTER TEMPO key BPM/TAP > F5 (T. Track On/Off ) toggle switch Available timings: 1/8, 1/8(3), 1/16, 1/16(3), 1/32, 1/32(3) SHIFT+ROLL Available note values: 960 = 1 2, 60 = 1 2(3), 80 = 1, 320 = 1 (3), 20 = 1/8, 160 = 1/8(3), 120 = 1/16, 80 = 1/16(3), 60 = 1/32, 0 = 1/32(3), 30 = 1/6 On the MPC-2000XL: Song Timing TC: 1/8 TC: 1/8(3) TC: 1/16 TC: 1/16(3) TC: 1/32 TC: 1/32(3) Swing Note parameters Program The End Terminology Translation Pattern Quantize 80 = 1 notes 320 = 1 (3) notes 20 = 1/8 notes 160 = 1/8(3) notes 120 = 1/16 notes 80 = 1/16(3) notes 60 = 1/32 notes Shuffle Partial Patch We hope you ve found this workshop helpful. Keep an eye out for other MV-8000 Workshop booklets, all available for downloading at For the latest MV-8000 updates and support tools, visit the Roland U.S. Web site at If you need personal assistance, call our amazing Product Support team at